Shenzhen Qixinwei Technology Co., Ltd
Shenzhen Qixinwei Technology Co., Ltd
Verified Business License Business License
Main Products: IGBT, Power management IC, MCU, FPGA
Home > Blog > IRF540 MOSFET: 100V N-Channel Power MOSFET — Specs, Applications, and Where to Source It

Contact Us

Miss Ahua
Sales Manager
Chat Now

Your inquiry content must be between 10 to 5000 characters

Please enter Your valid email address

Please enter a correct verification code.

IRF540 MOSFET: 100V N-Channel Power MOSFET — Specs, Applications, and Where to Source It

Key Takeaways

The IRF540 is a 100V N-channel power MOSFET in a TO-220 package, rated for 33A continuous drain current. Its maximum on-resistance is 44mΩ at VGS = 10V. It is widely used in switching power supplies, motor drives, DC-DC converters, and inverters. The IRF540N is the improved variant with lower on-resistance (40mΩ max). Because the IRF540 is a mature part, counterfeits circulate in the open market; verify the source and date code before buying in volume.

What Is the IRF540?

The IRF540 is an N-channel power MOSFET originally developed by International Rectifier as part of the HEXFET family. It is now manufactured by Infineon and other suppliers. It is a through-hole power transistor in a TO-220 package, designed for high-efficiency switching in medium to high-power circuits.

In plain terms, the IRF540 is a switch. A small voltage on its gate controls a much larger current flowing between its drain and source. That is why it appears in so many power designs: it lets a low-power control circuit switch a high-power load without a mechanical relay.

The IRF540 has been in production for decades, which is both its strength and its risk. It is proven, widely stocked, and well understood. It is also a part that is frequently counterfeited, because demand is steady and the part is often bought on the open market.

IRF540 Specifications

ParameterValue
Transistor typeN-channel power MOSFET
Drain-source voltage (VDSS)100V
Continuous drain current (ID)33A at TC = 25°C
Drain-source on-resistance (RDS(on))44mΩ max at VGS = 10V
Gate-source voltage (VGS)±20V
PackageTO-220AB, through-hole, 3-pin
TechnologyHEXFET

These are the headline figures from the manufacturer datasheet. Always confirm the exact variant before ordering, because the IRF540 and the IRF540N differ in on-resistance, and different manufacturers publish slightly different limits.

IRF540 vs IRF540N: What Is the Difference?

The IRF540N is the improved version of the IRF540. The key difference is on-resistance: the IRF540N is rated at 40mΩ maximum, against 44mΩ for the IRF540. In practice, the IRF540N runs slightly cooler at the same current, which matters in designs that push the part near its limits.

For most new designs, the IRF540N is the better choice when both are available at a similar price. For existing designs and repairs, the part specified on the bill of materials is the part to use. Swapping an IRF540 for an IRF540N is usually safe, but the reverse is not always true, and any substitution should be confirmed against the circuit requirements before committing to volume.

Where the IRF540 Is Used

The IRF540 is a general-purpose power switch, and its applications are broad. It is commonly found in switching power supplies, DC-DC converters, motor drivers and motor controllers, inverters, battery chargers, and audio amplifiers. Anywhere a circuit needs to switch tens of amps at up to 100V, and the designer wants a rugged through-hole part that mounts easily on a heatsink, the IRF540 is a natural fit.

Its TO-220 package is part of the appeal. It is easy to mount, easy to heatsink, and easy to replace. That is why the IRF540 remains in demand even as newer surface-mount MOSFETs offer lower resistance in smaller packages. For repair, maintenance, and long-life industrial equipment, the through-hole TO-220 format is often a requirement, not a preference.

How to Spot a Counterfeit IRF540

Because the IRF540 is a mature, high-volume part, it is a common target for counterfeiting. A remarked or cloned device may look correct but fail under load or fail months later in the field. Three checks reduce that risk.

First, buy from a traceable source. Ask where the parts came from and whether the supplier can document the chain of custody. A supplier who cannot explain the source is a warning sign.

Second, check the marking and the package. Genuine IRF540 devices have clean, consistent laser marking and a well-formed TO-220 package. Blurred printing, uneven leads, or a package that feels wrong are reasons to test before accepting the lot.

Third, test a sample before committing to volume. A basic electrical check confirms the part switches and its on-resistance is in the expected range. For higher-value orders, independent testing or X-ray inspection is worth the cost.

What to Do When the IRF540 Is Out of Stock

The IRF540 is widely stocked, but shortages happen, especially when a large buyer takes the available inventory or a manufacturer reallocates production. When the IRF540 is unavailable, the practical options are to check the IRF540N, to look for a pin-compatible 100V N-channel MOSFET in TO-220 with a similar current rating, or to place a scheduled order and cover the gap with buffer stock.

Do not accept a substitute on part number alone. Confirm the voltage, current, on-resistance, and package against the circuit requirements. A part that fits the footprint but cannot handle the current will fail, and the failure may not show up until the equipment is in service.

Where to Source the IRF540

For a single part, a franchised distributor is the first call. For a full bill of materials, or when the IRF540 is one line among many, an independent distributor is often faster. An independent electronic components distributor can search global stock, consolidate the IRF540 with the rest of your BOM into one shipment, and confirm availability and pricing in a single quote.

QIXINWEI is an independent distributor based in Shenzhen, the heart of the global electronics supply chain. We support manufacturers with BOM sourcing across power MOSFETs, microcontrollers, memory, power management ICs, sensors, connectors, and the full range of electronic components. For the IRF540 and other power MOSFETs, we verify the source, confirm the date code, and match the rest of your BOM in the same order, so one shortage does not stop the line.

FAQ

Is the IRF540 still in production? Yes. The IRF540 and the IRF540N remain in production with Infineon and other manufacturers, and they are widely stocked by distributors. Availability varies by region and by quantity, so confirm stock before committing to a production date.

What is the maximum voltage of the IRF540? The IRF540 is rated for 100V drain-to-source. Do not exceed that rating in the application, and allow margin for voltage spikes in inductive circuits.

What is the difference between the IRF540 and the IRF540N? The IRF540N is the improved version with lower on-resistance (40mΩ max, against 44mΩ for the IRF540). The IRF540N runs slightly cooler at the same current. Both are in a TO-220 package and are often interchangeable, but confirm against the circuit requirements before substituting.

Can I replace the IRF540 with a different MOSFET? You can, but only after confirming the replacement matches the voltage, current, on-resistance, gate drive, and package. A part that fits the footprint but cannot handle the current or the voltage will fail. If you are unsure, send the BOM and the circuit requirements and ask the supplier to confirm the substitution.

How do I buy the IRF540 in bulk? Send the part number, the quantity, and the date you need it. A distributor will confirm stock, pricing, and lead time. For a full BOM, send the whole list and the distributor will quote it together, which is faster than sourcing each line separately.

Conclusion

The IRF540 is a proven 100V N-channel power MOSFET that remains a workhorse in power switching, motor control, and DC-DC conversion. Its TO-220 package, 33A current rating, and 44mΩ on-resistance make it a reliable choice for designs that need a rugged through-hole switch. The main risks are counterfeits and stock gaps, and both are managed by buying from a verifiable source and testing before committing to volume.

Send your BOM list to QIXINWEI for a quote. We will check the IRF540 and the rest of your BOM against global stock and come back with lead time and pricing.


Share

Contact Us

Send Inquiry to Us
* Message
0/5000

Want the best price? Post an RFQ now!

Recommended Products